Delta 3 Products


Remotes And Keypads

DT Linear One Button Visor Remote, DNT00002A

The Linear DT DNT00002A visor style remote control will work with any Linear Delta 3 garage door or gate receiver. Programming the remote is simple just match the 8 on/off dip switches inside the unit to your existing remote or receiver. This Linear remote is a replacement for the following Linear Delta 3 remotes: DT, DTC, DTC, DTA, Frequency A, DNT00002A, DNT00002 Garage Door Remotes. This Linear remote will work with these Delta 3 receivers: DR, DR3A, DR-2, DR-4, DRA, DRA-4, DRM, DRQP, GRD and GRD-2.

$19.95

MINI-T One Button Key Ring Transmitter, DNT00026

The Linear DTLB DNT00026 key chain remote control will work with any Linear Delta 3 garage door or gate receiver. Programming the remote is simple just match the 8 on/off dip switches inside the unit to your existing remote or receiver. This Linear remote is a replacement for the following Linear Delta 3 remotes: DT, DTC, DTC, DTA, Frequency A, DNT00002A, DNT00002 Garage Door Remotes. This Linear remote will work with these Delta 3 receivers: DR, DR3A, DR-2, DR-4, DRA, DRA-4, DRM, DRQP, GRD and GRD-2.

$24.99

DTKP Linear Wireless Keypad, DNT00062

The Delta-3 DTKP Keypad is one of Linear’s series of wireless radio controls designed for use with automatic garage door and gate operators. The Delta-3 radio format provides 256 different codes. Standard Digital receivers are programmed by setting an 8-position dipswitch in the receiver. The DTKP will match the receiver’s code when the correct number keys are pressed before the START/STOP key. The correct code for the DTKP matches the “ON” positions of the receiver.

$39.95

DT-2A Linear Two Button Visor Remote, DNT00017A

The Linear DT-2A DNT00017A visor style remote control will work with any Linear Delta 3 garage door or gate receiver. Programming the remote is simple just match the 8 on/off dip switches inside the unit to your existing remote or receiver. This Linear remote is a replacement for the following Linear Delta 3 remotes: DT-2A, DT-2B, DT-2D, DNT00017A Garage Door Remotes. This Linear remote will work with these Delta 3 receivers: DR, DR3A, DR-2, DR-4, DRA, DRA-4, DRM, DRQP, GRD and GRD-2.

$24.95

DT-4A Linear Two Button Visor Remote, DNT00027B

The Model DT-4A 4-Channel Visor Transmitter is a wireless radio control designed for use with automatic garage/gate operators and access control systems. The transmitter can be used with one four-channel receiver (DR4), two two-channel receivers (DR2) or four single-channel receivers (DR or DRQP).

$29.95

DT3+1 Linear Four Button Visor Remote, DNT00027A

The DT3+1 4-Channel Common Gate Access Transmitter is a hand-held four-channel transmitter with a three-channel section plus an individual one-channel section. The Delta-3 DT-3+1 is a hand-held four-channel transmitter with a three-channel section plus an individual one-channel section. It is designed so that channel 1 may have a system code independent of the other three channels. This transmitter operating in conjunction with four single-channel receivers, or one multi-channel receiver, can perform a variety of remote switching tasks. The DT-3+1 has 2 digital encoders (switch A, and switch B). Coding switch “A” is designed for use with private multiple garage door openers, activated by push buttons 2, 3, and 4. Coding switch “B” under the back cover is designed for use with less frequently changed codes, such as a community access gate that can be activated by push button 1.

$34.95

DTG Safety Edge Transmitter, DNT00072

The Model DTG Safety Edge Transmitter is compatible with all of Delta-3 products. In a typical installation, the DTG is mounted on a motorized gate, door or barrier arm and wired to a standard exterior safety edge sensor which presents a closed circuit across the connecting wires when an object is hit during the closing of a gate. Part Number: DNT00072

$69.95

Receivers

DR One Garage Door Opener Receiver, DNR00001

The Linear DNR00001 DR Delta-3 1-Channel Wireless Receiver is a digital receiver designed for use with automatic gate operators. All of the Delta-3 transmitters, including the two and four-channel transmitters, are compatible with the Wireless Receiver. The Delta-3 radio format provides 256 different digital code combinations. The codes are set using the eight position coding switches in the units.

$39.95

DR-2 Two Garage Door Opener Receiver, DNR00018

The Delta-3 Model DR-2 2-Channel Receiver is a two-channel wireless radio control designed for use with automatic garage/gate operators and access control systems. The receiver can be activated by any of the Delta-3 format transmitters. Part Number: DNR00018

$44.95

DR-4 Four Garage Door Opener Receiver, DNR00023A

The Delta-3 Model DR-4 4-Channel Receiver is a wireless radio control designed for use with automatic garage/gate operators and access control systems. The receivers can be activated by any of the Delta-3 format transmitters. Part Number: DNR00023A

$69.95

GRD One Gate Operator Receiver, DNR00101

The GRD is a 1-Channel Gate Receiver designed for use with automatic gate operators or systems where a remote antenna is needed. The receiver uses the Delta-3 radio format, with 256 possible codes, set by dipswitch. Part Number: DNR00101

$44.95

GRD Two Gate Operator Receiver, DNR00102

The GRD-2 is a 2-channel Gate Receiver designed for use with automatic gate operators or systems where a remote antenna is needed. The GRD-2 can operate two gates, one gate and an obstacle sensor, or channel one can open the gate and channel two can close the gate. The receiver uses the Delta-3 radio format, with 256 possible codes for each channel, set by dipswitch. Part Number: DNR00102

$64.95

DRQP One Gate Operator Receiver, DNR0013P

The Model DRQP 1-Channel Gate Receiver is a high-sensitivity, short-range radio receiver that operates in conjunction with the 9-inch local antenna (supplied). The DRQP is designed for use with automatic gate operators or systems where a remote antenna is needed. Part Number: DNR00013P

$49.95

Accessories

DVC - Delta 3 Visor Clip, 210261

Replacement spring steel visor/belt clip for Delta-3 DT style transmitters. Part Number: 210261

$4.95

109206 3-Wire Adapter

The Model 109206 3-Wire Adapter is designed for remote placement of a 3-terminal garage door operator receiver. The harness adapts Multi-Code 1090 and 3090 3-terminal receivers with push-on terminals to 3-terminal operators with screw terminals. The adapter is a three foot long, 3-conductor cable, with push-on lugs on one end and spade lugs on the other end.

$7.95

109207 Transformer With Wiring Harness

The Model 109207 Wiring Harness is designed for remote placement of a 3-terminal garage door operator receiver. The harness adapts 3-terminal receivers with push-on terminals to 2-terminal operators. The harness is prewired with three push-on terminals, a 24 VAC power transformer with 25-foot leads, and a 2-wire/2-terminal lead to connect to the operator's pushbutton terminals.

$12.95

TF524 Model, 24-Volt Transformer, AAE00010

120 VAC to 24-volt VAC @ 50 mA transformer for powering door and gate operator receivers.

$12.95

106603 Remote Whip Antenna

The Model 106603 Remote Whip Antenna is designed as a remote mounted antenna. This antenna is useful when a receiver must be mounted in poor signal reception location such as inside a gate operator case. Remote antennas are also useful in installations where the receiver is located inside a metal building and the transmitters will be activated from outside the building. The antenna has a bracket for mounting the antenna and connects to the Type-F connector on the receiver through a 15-foot coax cable. NOTE: Generally, the higher the antenna is mounted above ground level, the better the radio range will be.

$28.95

106604 Local Antenna

The Model 106604 Local Antenna is designed as a local rigid antenna. The antenna connects to the Type-F connector on the receiver and will stand upright. A plastic boot covers the connector.

$9.95