Remotes, Keypads, Receivers

Linear's Delta 3 And MegaCode Products

Delta 3 Products


Remotes And Keypads

DT Linear One Button Visor Remote, DNT00002A

The Linear DT DNT00002A visor style remote control will work with any Linear Delta 3 garage door or gate receiver. Programming the remote is simple just match the 8 on/off dip switches inside the unit to your existing remote or receiver. This Linear remote is a replacement for the following Linear Delta 3 remotes: DT, DTC, DTC, DTA, Frequency A, DNT00002A, DNT00002 Garage Door Remotes. This Linear remote will work with these Delta 3 receivers: DR, DR3A, DR-2, DR-4, DRA, DRA-4, DRM, DRQP, GRD and GRD-2.

$19.95

MINI-T One Button Key Ring Transmitter, DNT00026

The Linear DTLB DNT00026 key chain remote control will work with any Linear Delta 3 garage door or gate receiver. Programming the remote is simple just match the 8 on/off dip switches inside the unit to your existing remote or receiver. This Linear remote is a replacement for the following Linear Delta 3 remotes: DT, DTC, DTC, DTA, Frequency A, DNT00002A, DNT00002 Garage Door Remotes. This Linear remote will work with these Delta 3 receivers: DR, DR3A, DR-2, DR-4, DRA, DRA-4, DRM, DRQP, GRD and GRD-2.

$24.99

DTKP Linear Wireless Keypad, DNT00062

The Delta-3 DTKP Keypad is one of Linear’s series of wireless radio controls designed for use with automatic garage door and gate operators. The Delta-3 radio format provides 256 different codes. Standard Digital receivers are programmed by setting an 8-position dipswitch in the receiver. The DTKP will match the receiver’s code when the correct number keys are pressed before the START/STOP key. The correct code for the DTKP matches the “ON” positions of the receiver.

$39.95

DT-2A Linear Two Button Visor Remote, DNT00017A

The Linear DT-2A DNT00017A visor style remote control will work with any Linear Delta 3 garage door or gate receiver. Programming the remote is simple just match the 8 on/off dip switches inside the unit to your existing remote or receiver. This Linear remote is a replacement for the following Linear Delta 3 remotes: DT-2A, DT-2B, DT-2D, DNT00017A Garage Door Remotes. This Linear remote will work with these Delta 3 receivers: DR, DR3A, DR-2, DR-4, DRA, DRA-4, DRM, DRQP, GRD and GRD-2.

$24.95

DT-4A Linear Two Button Visor Remote, DNT00027B

The Model DT-4A 4-Channel Visor Transmitter is a wireless radio control designed for use with automatic garage/gate operators and access control systems. The transmitter can be used with one four-channel receiver (DR4), two two-channel receivers (DR2) or four single-channel receivers (DR or DRQP).

$29.95

DT3+1 Linear Four Button Visor Remote, DNT00027A

The DT3+1 4-Channel Common Gate Access Transmitter is a hand-held four-channel transmitter with a three-channel section plus an individual one-channel section. The Delta-3 DT-3+1 is a hand-held four-channel transmitter with a three-channel section plus an individual one-channel section. It is designed so that channel 1 may have a system code independent of the other three channels. This transmitter operating in conjunction with four single-channel receivers, or one multi-channel receiver, can perform a variety of remote switching tasks. The DT-3+1 has 2 digital encoders (switch A, and switch B). Coding switch “A” is designed for use with private multiple garage door openers, activated by push buttons 2, 3, and 4. Coding switch “B” under the back cover is designed for use with less frequently changed codes, such as a community access gate that can be activated by push button 1.

$34.95

DTG Safety Edge Transmitter, DNT00072

The Model DTG Safety Edge Transmitter is compatible with all of Delta-3 products. In a typical installation, the DTG is mounted on a motorized gate, door or barrier arm and wired to a standard exterior safety edge sensor which presents a closed circuit across the connecting wires when an object is hit during the closing of a gate. Part Number: DNT00072

$69.95

Receivers

DR One Garage Door Opener Receiver, DNR00001

The Linear DNR00001 DR Delta-3 1-Channel Wireless Receiver is a digital receiver designed for use with automatic gate operators. All of the Delta-3 transmitters, including the two and four-channel transmitters, are compatible with the Wireless Receiver. The Delta-3 radio format provides 256 different digital code combinations. The codes are set using the eight position coding switches in the units.

$39.95

DR-2 Two Garage Door Opener Receiver, DNR00018

The Delta-3 Model DR-2 2-Channel Receiver is a two-channel wireless radio control designed for use with automatic garage/gate operators and access control systems. The receiver can be activated by any of the Delta-3 format transmitters. Part Number: DNR00018

$44.95

DR-4 Four Garage Door Opener Receiver, DNR00023A

The Delta-3 Model DR-4 4-Channel Receiver is a wireless radio control designed for use with automatic garage/gate operators and access control systems. The receivers can be activated by any of the Delta-3 format transmitters. Part Number: DNR00023A

$69.95

GRD One Gate Operator Receiver, DNR00101

The GRD is a 1-Channel Gate Receiver designed for use with automatic gate operators or systems where a remote antenna is needed. The receiver uses the Delta-3 radio format, with 256 possible codes, set by dipswitch. Part Number: DNR00101

$44.95

GRD Two Gate Operator Receiver, DNR00102

The GRD-2 is a 2-channel Gate Receiver designed for use with automatic gate operators or systems where a remote antenna is needed. The GRD-2 can operate two gates, one gate and an obstacle sensor, or channel one can open the gate and channel two can close the gate. The receiver uses the Delta-3 radio format, with 256 possible codes for each channel, set by dipswitch. Part Number: DNR00102

$64.95

DRQP One Gate Operator Receiver, DNR0013P

The Model DRQP 1-Channel Gate Receiver is a high-sensitivity, short-range radio receiver that operates in conjunction with the 9-inch local antenna (supplied). The DRQP is designed for use with automatic gate operators or systems where a remote antenna is needed. Part Number: DNR00013P

$49.95

Accessories

DVC - Delta 3 Visor Clip, 210261

Replacement spring steel visor/belt clip for Delta-3 DT style transmitters. Part Number: 210261

$4.95

109206 3-Wire Adapter

The Model 109206 3-Wire Adapter is designed for remote placement of a 3-terminal garage door operator receiver. The harness adapts Multi-Code 1090 and 3090 3-terminal receivers with push-on terminals to 3-terminal operators with screw terminals. The adapter is a three foot long, 3-conductor cable, with push-on lugs on one end and spade lugs on the other end.

$7.95

109207 Transformer With Wiring Harness

The Model 109207 Wiring Harness is designed for remote placement of a 3-terminal garage door operator receiver. The harness adapts 3-terminal receivers with push-on terminals to 2-terminal operators. The harness is prewired with three push-on terminals, a 24 VAC power transformer with 25-foot leads, and a 2-wire/2-terminal lead to connect to the operator's pushbutton terminals.

$12.95

TF524 Model, 24-Volt Transformer, AAE00010

120 VAC to 24-volt VAC @ 50 mA transformer for powering door and gate operator receivers.

$12.95

106603 Remote Whip Antenna

The Model 106603 Remote Whip Antenna is designed as a remote mounted antenna. This antenna is useful when a receiver must be mounted in poor signal reception location such as inside a gate operator case. Remote antennas are also useful in installations where the receiver is located inside a metal building and the transmitters will be activated from outside the building. The antenna has a bracket for mounting the antenna and connects to the Type-F connector on the receiver through a 15-foot coax cable. NOTE: Generally, the higher the antenna is mounted above ground level, the better the radio range will be.

$28.95

106604 Local Antenna

The Model 106604 Local Antenna is designed as a local rigid antenna. The antenna connects to the Type-F connector on the receiver and will stand upright. A plastic boot covers the connector.

$9.95

MegaCode Products


Remotes And Keypad

MCT-11 One Button Visor Remote, DNT00090

The Model MCT-11 One button visor transmitter is a wireless radio control designed for use with automatic garage and gate operators. The Model MCT-11 MegaCode transmitters and receivers do not contain a typical ”coding switch”. Each transmitter is permanently coded at the factory. The transmitter sends a unique code when the button is pressed. The receiver is programmed by learning a transmitter’s unique digital code. The receiver will activate only from the memorized MegaCode transmitters.

$24.95

MCT-3 Three Button Visor Remote, DNT00089

The Model MCT-3 Three button visor transmitter is a wireless radio control designed for use with automatic garage and gate operators. Each of the three transmitter buttons will send a unique code when pressed. One button can be used to activate the individual’s garage door opener, a second button can operate an access gate, a third button can activate an additional garage door operator or most Linear 318 MHz MegaCode wireless receivers.

$27.95

MDTK Wireless Keypad, DNT00058

The Model MDTK Keypad Transmitter is one of Linear’s MegaCode series of wireless radio controls designed for use with automatic garage door and gate operators. The MegaCode radio format provides unparalleled security with more than a million different codes. In operation, the user enters their unique code on the unit’s keypad (1 to 6 digits long) and presses the START/STOP button to activate the door operator. For up to 30 seconds after the last activation, the MDTK can be re-triggered by simply pressing the START/STOP button again. This allows the user to stop or reverse the opener quickly, without having to re-enter their code. Part Number: DNT00058

$39.95

MCT-1 One Button Visor Remote, DNT00083

The Model MCT-1 One button visor transmitter is a wireless radio control designed for use with automatic garage and gate operators. Each of the three transmitter buttons will send a unique code when pressed. One button can be used to activate the individual’s garage door opener, a second button can operate an access gate, a third button can activate an additional garage door operator or most Linear 318 MHz MegaCode wireless receivers.

$24.95

MCT-2 One Button Visor Remote, DNT00084

The Model MCT-2 Two button visor transmitter is a wireless radio control designed for use with automatic garage and gate operators. Each of the three transmitter buttons will send a unique code when pressed. One button can be used to activate the individual’s garage door opener, a second button can operate an access gate, a third button can activate an additional garage door operator or most Linear 318 MHz MegaCode wireless receivers.

$24.99

MDT-1A One Button Visor Remote, DNT00052A

The Model MDT-1A One Button Visor Transmitter is designed for use with Linear’s access control products. The Model MDT-1A is a single-channel device. Pressing either the round button on the transmitter’s front, or the small button on the transmitter’s top will send the same signal. The top button can be hidden with the top button cover supplied. The transmitter is MegaCode format, which means each transmitter is factory preprogrammed with one of over 1,000,000 codes, virtually eliminating the possibility of code duplication. Because the receiver ”learns” each specific code, no unauthorized person can gain access to the system by reprogramming a transmitter. Part Number: DNT00052A

$29.95

MDT-2A Two Button Visor Remote, DNT00053A

The Model MDT-2A Three Button Visor Transmitter is designed for use with Linear’s access control products. The Model MDT-2A is a three-channel device. Pressing the transmitter’s left or right front button sends channel one or two. Pressing the small button on the transmitter’s top sends channel three. The top button can be hidden with the top button cover supplied. Also included are lithium batteries with a five-year service life and a visor clip. The transmitter is MegaCode format, which means each transmitter is factory preprogrammed with one of over 1,000,000 codes, virtually eliminating the possibility of code duplication. Because the receiver ”learns” each specific code, no unauthorized person can gain access to the system by reprogramming a transmitter. Part Number: DNT00053A

$29.95

MDT-4A Five Button Visor Remote, DNT00054A

The Model MDT-4A Five Button Visor Transmitter is designed for use with Linear’s access control products. The Model MDT-4A is five-channel device. Pressing one of the transmitter’s front buttons sends channel one through four. Pressing the small button on the transmitter’s top sends channel five. The top button can be hidden with the top button cover supplied. Also included are lithium batteries with a five-year service life and a visor clip. The transmitter is MegaCode format, which means each transmitter is factory preprogrammed with one of over 1,000,000 codes, virtually eliminating the possibility of code duplication. Because the receiver ”learns” each specific code, no unauthorized person can gain access to the system by reprogramming a transmitter. Part Number: DNT00054A

$34.95

ACT-21A One Button Key Chain Remote, ACP00607

The Model ACT-21A 1-Channel Key Ring Transmitter is designed for use with Linear’s access control products. The Model ACT-21A is a single-channel device supplied with a quick-disconnect key ring. Also included are lithium batteries with a five-year service life. A unique 10-second time-out feature prevents the system from being shut down by a single transmitter transmitting continuously. The transmitter is MegaCode format, which means each transmitter is factory preprogrammed with one of over 1,000,000 codes, virtually eliminating the possibility of code duplication. Because the receiver ”learns” each specific code, no unauthorized person can gain access to the system by reprogramming a transmitter. Part Number: ACP00607

$27.95

ACT-22A Two Button Key Chain Remote, ACP00606A

The Model ACT-22A Three Button Key Ring Transmitter is designed for use with Linear’s access control products. The Model ACT-22A is a three-channel device. Pressing the transmitter’s left or right front button sends channel one or two. Pressing both buttons sends channel three. Lithium batteries with a five-year service life are included and the transmitter is supplied with a quick-disconnect key ring. A unique 10-second time-out feature prevents the system from being shut down by a single transmitter transmitting continuously. The transmitter is MegaCode format, which means each transmitter is factory preprogrammed with one of over 1,000,000 codes, virtually eliminating the possibility of code duplication. Because the receiver ”learns” each specific code, no unauthorized person can gain access to the system by reprogramming a transmitter. Part Number: ACP00606A

$29.95

ACT-31 One Button Key Chain Remote, ACP00879

The Model ACT-31B One Button Key Ring Transmitter is designed for use with Linear’s access control products. The Model ACT-31B is a single-channel device supplied with a quick-disconnect key ring. A unique 10-second time-out feature prevents the system from being shut down by a single transmitter transmitting continuously. The transmitter is MegaCode format, which means each transmitter is factory preprogrammed with one of over 1,000,000 codes, virtually eliminating the possibility of code duplication. Because the receiver ”learns” each specific code, no unauthorized person can gain access to the system by reprogramming a transmitter. Part Number: ACP00879

$27.95

ACT-34B Four Button Key Chain Remote, ACP00872

The Model ACT-34B four Button Key Ring Transmitter is designed for use with Linear’s access control products. The Model ACT-34B is a four-channel device supplied with a quick-disconnect key ring. Also included are lithium batteries with a five-year service life. A unique 10-second time-out feature prevents the system from being shut down by a single transmitter transmitting continuously. The transmitter is MegaCode format, which means each transmitter is factory preprogrammed with one of over 1,000,000 codes, virtually eliminating the possibility of code duplication. Because the receiver ”learns” each specific code, no unauthorized person can gain access to the system by reprogramming a transmitter. Part Number: ACP00872

$29.95

Receivers

MDR One Garage Door Receiver, DNR00071

MDR Linear MegaCode Garage Door Receiver, DNR00071 Linear MDR-1 Megacode receiver is a 1 channel receiver for one garage door or gate operators. 24-volt, single-channel, three-terminal receiver, 10 code capacity, MegaCode format. Part Number: DNR00071

$39.95

MDR-2 Two Garage Door Opener Receiver, DNR0007

The MegaCode series of digital receivers are wireless radio controls designed for use with automatic garage door and gate openers. The MegaCode radio format provides unparalleled security. The transmitter and receiver can be programmed to more than a million different codes. Part Number: DNR00072

$54.95

MDRG One Gate Operator Receiver, DNR00073

The MegaCode series of digital receivers are wireless radio controls designed for use with automatic gate openers. The MegaCode radio format provides unparalleled security. The transmitter and receiver can be programmed to more than a million different codes. Part Number: DNR00073

$54.95

MGR-2 Two Gate Operator Receiver, DNR00105

The MGR-2 is a 2-Channel Gate Receiver designed for use with automatic gate operators or systems where a remote antenna is needed. The MGR-2 can operate two gates, one gate and an obstacle sensor, or channel one can open the gate and channel two can close the gate. The receiver uses the MegaCode radio format with over a million possible code combinations. Up to 40 transmitters can be programmed into the receiver. Part Number: DNR00105

$59.95

MGR One Gate Operator Receiver, DNR00104

The MGR is a 1-Channel Gate Receiver designed for use with automatic gate operators or systems where a remote antenna is needed. The receiver uses the MegaCode radio format with over a million possible code combinations. Up to 40 transmitters can be programmed into the receiver. Part Number: DNR00104

$49.95

SMDRG One Gate Operator Receiver, DNR00098

24-volt, single-channel high-gain receiver with one Form "C" relay output for residential or commercial gate control applications, Type "F" external antenna connector, 40 code capacity, MegaCode format. Part Number: DNR00098

$59.95

MDR/U One Garage Door Plug-in Receiver, DNR00100

The Model MDR/U 1-Channel Plug-in Receiver is a versatile (universal) receiver that makes it very easy to equip nearly any garage door operator for use with Linear’s popular MegaCode format transmitters. MegaCode uses a frequency of 318 MHz and features over one million radio codes to all but eliminate any possibility of code duplication. It offers simplified programming via the receiver’s learn mode. Previously, when installers wanted to add MegaCode capability to a garage door operator that did not come already outfitted with a MegaCode receiver, they had to use Linear’s MDR receiver in combination with a power transformer. The MDR/U replaces the MDR and plugs directly into any electrical outlet. All that is required is running a single two-conductor wire from the MDR/U to the operator’s push-button input. The MDR/U has one normally open contact output. It can be used to send a remote control signal from up to 10 MegaCode transmitters. A learn mode dramatically simplifies programming to just a button press. Part Number: DNR00100

$49.95

Accessories

MVC - Visor Clip For MCT-11 And MCT-3, 214829

Replacement spring steel visor clip for MCT-11 And MCT-3 transmitters.

$4.95

DVC - Visor Clip For MCT-1, MCT-2 , 210261

Replacement spring steel visor/belt clip for MCT-1, MCT-2 style transmitters. Part Number: 210261

$4.95

109207 Transformer With Wiring Harness

The Model 109207 Wiring Harness is designed for remote placement of a 3-terminal garage door operator receiver. The harness adapts Multi-Code 109020 and 309013 3-terminal receivers with push-on terminals to 2-terminal operators. The harness is prewired with three push-on terminals, a 24 VAC power transformer with 25-foot leads, and a 2-wire/2-terminal lead to connect to the operator's pushbutton terminals.

$12.95

TF524 Model, 24-Volt Transformer, AAE00010

120 VAC to 24-volt VAC @ 50 mA transformer for powering door and gate operator receivers.

$12.95

109206 3-Wire Adapter

The Model 109206 3-Wire Adapter is designed for remote placement of a 3-terminal garage door operator receiver. The harness adapts 3-terminal receivers with push-on terminals to 3-terminal operators with screw terminals. The adapter is a three foot long, 3-conductor cable, with push-on lugs on one end and spade lugs on the other end.

$7.95

106603 Remote Whip Antenna

The Model 106603 Remote Whip Antenna is designed as a remote mounted antenna. This antenna is useful when a receiver must be mounted in poor signal reception location such as inside a gate operator case. Remote antennas are also useful in installations where the receiver is located inside a metal building and the transmitters will be activated from outside the building. The antenna has a bracket for mounting the antenna and connects to the Type-F connector on the receiver through a 15-foot coax cable. NOTE: Generally, the higher the antenna is mounted above ground level, the better the radio range will be.

$28.95

106604 Local Antenna

The Model 106604 Local Antenna is designed as a local rigid antenna. The antenna connects to the Type-F connector on the receiver and will stand upright. A plastic boot covers the connector.

$9.95